TEXMO Rigid PVC pipes are manufactured under strict quality control using the latest technology. conforming to IS-4985:2000 specifications
TEXMO Rigid PVC pipes are best preferred for irrigation in agriculture farms, water supply, disposal of oils and chemical effluent & waste, acid & slurries transportation, telecommunication cable ducting etc.
TEXMO Rigid PVC pipes have been preferred over other available resources due to varied salient features.
| Strong And Durable | : | TEXMO Rigid PVC Pipes & Fittings are Strong, impact-resistant, and unaffected by weather conditions. |
| Light Weight | : | Are easy to handle, transport & install even on difficult terrain. |
| Leak Proof | : | Precision design ensures they are completely free from leaks. |
| Better Flow Characteristic | : | There is no deposit formation which implies better flow. |
| Energy Saving | : | Have smooth internal surface which implies low frictional loss hence the power consumption is on lower side. |
| Resistant to Fire | : | Are self extinguishing with good thermal & electric insulation. |
| Termite Proof And UV Resistant | : | 1) Moisture 2) Corrosion 3) Chemicals 4) Abrasion 5) Weathering. Are termite proof and resistant to ultraviolet rays. |
| Maintenance Free | : | No rusting or environmental damage. |
| Long Lasting & Maintenance Free | : | Are free from corroding factors, hence last longer and require minimum maintenance. |
| Properties | TEXMO PVC Pipe | Galvanized Pipe | AC Pipe | Cast Iron Pipe | Advantages of TEXMO Rigid PVC Pipe |
|---|---|---|---|---|---|
| Weight | Light | Heavy | Heavy | Very Heavy | Very light weight, therefore easy in shifting and convenient in jointing. |
| Surface | Very Smooth | Rough | Light Rough | Rough | Smooth surface gives 25% more flow, therefore smaller diameter pipe can be used, thus economical. |
| Length | 6 Meter | 5 to 6 Meter | 3 to 4 Meter | 3 to 4 Meter | Available in full length, so fewer joints and couplers are needed, making them economical. |
| Flow | Initially 50% more flow in comparison to others and retains flow till the end. | Initial flow gets reduced slowly because of rust. | Initial flow is 40% more. | Initially flow reduced by 40% to 50% after 5 to 10 years. | Full and constant flow from initial stage, which is 25% more than GI pipe. |
| Effect of Rust | Question of rust does not arise. | Gets rusted. | Does not get rusted. | Rapid rust formation. | It is rust-proof, therefore long-lasting. |
| Accumulation of Particles Forming Rust | Very less chance, therefore diameter of pipe remains unaltered permanently. | Particles accumulate heavily, thus diameter is reduced in the long run. | Particles do not accumulate. | Heavy accumulation of particles, thus diameter gets reduced after a period. | Since diameter remains the same, it gives uniform flow permanently. |
| Fittings Arrangement | Very easy, quick, and leakproof. | Threading is required. | Easy | Very laborious and time-consuming. | Economical in jointing. It is leakproof, therefore no complaints during repairs. Prompt completion of scheme jobs. |
| Life | Lasts a lifetime. | Gets rusted, so required to be changed after 30 years. | Less chances of changing. | Required to be changed after 30 years. | Investment made once in a lifetime. |
| Cost of Material | Very less expensive. | Very expensive. | Very costly. | Very economical. | Very economical as compared to other pipe types. |
| CLASS | Available Sizes | Sizes – From | To |
|---|---|---|---|
| Class I | 2.5 kg/cm2 | 90 mm | 315mm |
| Class II | 4 kg/cm2 | 63mm | 315mm |
| Class III | 6 kg/cm2 | 40mm | 315mm |
| Class IV | 8 kg/cm2 | 25mm | 315mm |
| Class V | 10 kg/cm2 | 20mm | 315mm |
With our commitment to strength, precision, and innovation, we deliver piping solutions that not only support vital water flow but also empower communities, agriculture, and industries.
Copyright © 2025 All Rights Reserved.
