HDPE Pipes        

TEXMO HDPE Pipes are manufactured under strict quality control with latest technology conforming to IS-4984 and made as per IS-14333, ISO-4427 & Din 8074 specifications. TEXMO HDPE pipes are best preferred for potable water supply, irrigation schemes, chemicals and edibles transportation, effluent collection and disposal system, submarine and underwater pipe lines, hydro transport system, gas/compressed air system etc. TEXMO HDPE pipes have been preferred over other available resources due to varied salient features.

SALIENT FEATURES
Strong and Durable TEXMO H.D.P.E. Pipes are strong, resilient and impact resistant.
Light weight Are easy to handling, transportation & installation, even on difficult terrain.
Length as Required Are available in straight as well as coil lengths, so less, joints & couplers needed.
Better Flow Characteristic There is no deposit formation, so internal diameter of pipe remains the same and hence better flow.
Energy Saving Have smooth internal surface which implies low frictional loss. Hence the power consumption is on lower side.
Leak Proof Are leak proof due to close dimensional tolerance & precision designing and joining.
Chemical Resistance Are totally inert to all the chemicals.
Hygienic & Odourless There is no contamination as the pipes are resistant to - 1) Scale formation 2) Chemical formation 3) Biological formation.
Economical Are reasonably priced and long lasting. These pipes have better flow characteristics so a small diameter pipe can be used.
Long Lasting In fact 10 times longer lasting than GI or Rubber pipe. These pipes are free from rusting, weathering & abrasion therefore are an investment for a life time.
Maintenance Free Have no breakage and are unaffected by environmental stress.
APPLICATION
Industrial
  • In petrochemical, paper, dye, paint, cement and other chemical industries for disposal of chemical effluent and waste.
  • Oil and milk transportation in industries and dairies.
  • Discharge of radioactive waste.
  • Acid and Slurries transportation.
  • Compressed gas supply at mines and construction sites.
  • External & internal drainage and sewage.
  • Salt water handling.
Agricultural
  • Water supply for irrigation in fields.
  • Drip irrigation scheme.
  • Sprinkler irrigation.
  • Insecticide spratying.
  • Drawing water from pump set for distribution.
  • Most suitable for submersible pumps and jet pumps.
Other
  • Telecommunication cable ducting.
  • Bio-gas, coal gas & natural gas distribution lines for domestic and industrial use.
  • Air conditioner ducting.
  • Submarine delivery system.
Domestic
  • For potable water supply in rural and urban areas.
Product Range
  • TEXMO HDPE PIPES are available in sizes ranging from 20mm - 315mm in 2.5, 4.0, 6.0, 8.0, 10.0, 12.5 and 16kg/cm2 pressure rating.
  • Sizes ranging from 25mm to 110mm for suction, submersible and jet pump applications. Pressure class depends upon the depth of the bore.
RECOMMENDATIONS LENGTH / PACKING
Depth of bore in mtrs
Upto 55 mtrs
Upto 90 mtrs
Upto 140 mtrs
Upto 170 mtrs
Pressure Classes
4.0 kg/cm2
6.0 kg/cm2
10.0 kg/cm2
12.5 kg/cm2
Size Range
20mm to 50mm
63mm to 90mm
110mm to 315mm
Length
100m, 200m, 300m, 500m coils
100m, 200m coils
In straight length of 6m